Thermwood Revises EZ Office YouBuild Library

Posted by Duane Marrett on Thu, Oct 11, 2012

Tags: Thermwood, Nested Base, Announcements, Model 43, Model 45, Furniture, YouBuild, US made, EZ Office

YouBuild

Thermwood has completely redesigned and expanded the EZ Office library, which is part of the design offerings under its YouBuild program. Discussions with major national office product retailers have uncovered the need for a variety of resizable office furniture but the original EZ Office was only available in limited fixed sizes.

YouBuild EZ Office Library has been Revised

To address this, Thermwood programmers have (while retaining original styling) redesigned EZ Office products so they can be freely resized by the customer. All new designs have been machined, built and fully vetted and are ready.

Desks come in several styles which are each adjustable to any width within a range:

Library Style desks offer a working desktop with either two or three narrow drawers under the top or also available without drawers. 

Office Style desks can be made in widths from 30” to 66”. One style, available in widths from 30” to 48”, has a four drawer stack on either the left or right side. The second version available from 48” to 66” wide offers dual drawer stacks.

Mini Student style desks feature a pull-out shelf available from 24” to 36” (for use where space is at a premium).

Desks have finished appearance on both front and back and can be positioned against a wall or away from the wall with the users back to the wall. The simple, clean designs blend with virtually any decor.

Credenzas come in several complimentary styles with adjustable width to match the desks, offering the ability to mix and match components to address a wide variety of needs. Upper cabinet modules can be mounted to desks or credenzas of the same width.

Finally, a collection of base and tall wall cabinets and single or double shelves round out the collection.

YouBuild EZ Office Library has been Revised

This collection is called "EZ" because of its simple yet elegant design and the fact that all pieces are assembled with a screwdriver using “Lock Joints”. “Slot Slide” drawers assure perfect alignment yet do not require separate drawer slides. Drawer bottoms extend past the drawer sides and slide in dado slots machined into partitions.

Three different styles of drawer and door pulls are offered and some items, which can function without pulls, are available without pulls. These units are relatively easy to assemble with a caution that larger pieces may need two people to handle.

The full EZ Office library offering can be seen here.


About YouBuild:

YouBuild is a new and exciting opportunity for woodworkers with the proper equipment to address the huge furniture market in a unique and practical manner. Aided by local Retail Dealers and Design Centers, orders are placed online, parts are cut by local shops and then assembled by the customer. Extensive integrated technology make this easy, practical and profitable and an extensive and growing library of customizable designs address almost every area of home and office furnishings. For more information about YouBuild, click HERE

Thermwood Streaming Live at the CabinetMaker/FDM Woodworking Virtual Trade Show

Posted by Duane Marrett on Fri, May 13, 2011

Tags: Thermwood, Woodworking, Nested Base, 3 Axis, Announcements, Trade Shows, edgebanding, CabinetShop, Model 43

Thermwood Virtual Trade Show

Once again, Thermwood is a proud sponsor of the FREE CabinetMakerFDM Woodworking Business E-vent.  The first such show (held last November), was a great success, and we invite you to attend this unique and interactive event on May 19th, 2011.

As an attendee, you’ll have the opportunity to view five educational sessions on innovations in the wood products industry, network with colleagues, visit our booth and chat in real-time in the Exhibit Hall - All from the comfort of your office!

Thermwood Streaming Live From the CabinetMaker/FDM Online Trade Show

Thermwood will also be running live machine demonstrations (nested based cabinets, moldings and various other items) on our CabinetShop 43 and Fravol Edgebander throughout the day - available via webcam.

Register online to join us at the Woodworking Business E-vent. We look forward to seeing you there!

Thermwood and Supply Partners Donate to Habitat For Humanity

Posted by Duane Marrett on Thu, Sep 09, 2010

Tags: Thermwood, eCabinet Systems, CNC, CNC Routers, wood, Woodworking, Nested Base, 3 Axis, Announcements, Trade Shows, CabinetShop, Model 43, Technology, CNC Router, Cabinet, Product Information, QuickCut, 43, manufacturing, IWF, Barb Dado, Green, Habitat for Humanity

At the recent IWF show in Atlanta, Thermwood partnered with Hafele, Columbia Forest Products and Conestoga to build complete cabinets for Habitat for Humanity.   

Thermwood demonstrated a working production cell consisting of the CabinetShop 43 CNC Router (for nested based applications) and a Fravol S2 ECO edgebander.  Attendees were able to get hands on experience using the easiest and simplest system in the industry.  Within a few seconds they selected a product to cut, modified the size and watched the machine cut their parts.  Attendees then took the parts to the edgebander to complete the process.

Complete cabinets were produced at the show from the ¾” thick, pre-finished maple plywood provided by Columbia Forest Products.  This Pure Bond plywood is sealed with AquaSEAL (a formaldehyde-free recyclable overlay conforming to the latest in green technology).

Columbia

 

 

pure bond logo

 

 

 

Hafele provided the hinges, slides and shelf hardware for the cabinets, and Conestoga Doors providedfinished five-piece doors and solid wood drawer fronts. 

Hafele

 

Conestoga

 

 

Cabinet joinery was Thermwood’s new revolutionary Barb Dado joint (patent pending), which allowed the cabinets to be put together without the use of clamps or other holding methods.  The Barb Dado joint is a modified versionof the Blind Dado joint in which we machine a series of barbs in the mortise slot. When you press the parts together, the barbs bend down, bending the fibers in the wood downward firmly holding the pieces together. It is a lot harder to pull it apart than to put it together. This means you can assemble cabinets without screws, clamps or any other fasteners.

Thermwood Barb Dado

The result were beautiful, complete cabinets produced quickly, utilizing an innovative new, highly efficient manufacturing approach which results in a superior structure coupled with enhanced use of materials, all at a dramatically lower price. All cabinets produced at the IWF were donated to Habitat for Humanity.


Thermwood Streaming Live from IWF in Atlanta

Posted by Duane Marrett on Wed, Aug 25, 2010

Tags: Thermwood, CNC, CNC Routers, Woodworking, Nested Base, 3 Axis, Announcements, Trade Shows, edgebanding, Model 43, Technology, Link, Video, nested based, Product Information, IWF, edgebander, Streaming, Live, Barb Dado

We are streaming live from IWF, starting today 8/25/10. See the show without leaving your office!

Visit the Thermwood Booth from your computer at:

http://www.livestream.com/thermwoodcnc

 

Thermwood Streaming Live from IWF 2010

Featuring the New Barb Dado Joint:

We have a CabinetShop 43 production cell at our Booth # 5153 demonstrating the new Barb Dado Joint. This is a new development at Thermwood that we have applied for patent protection on. The joint is a modified version of the Blind Dado joint in which we machine a series of barbs in the mortise slot. When you press the parts together, the barbs bend down, bending the fibers in the wood downward firmly holding the pieces together. It is a lot harder to pull it apart than to put it together. This means you can assemble cabinets without screws, clamps or any other fasteners.

Thermwood Barb Dado Tool

This simple idea is pretty revolutionary. We have a video from another project which shows how a cabinet is assembled using the barb dado joint. You can find it at:


http://www.thermwood.com/thermwood_barb_dado_joint.htm

WMS 2009 Habitat for Humanity Initiative - CNC Automation

Posted by Jason Susnjara on Mon, Jan 11, 2010

Tags: Thermwood, CNC, CNC Routers, Announcements, Trade Shows, Model 43, Furniture, CNC Automation, Canada, Habitat for Humanity, WMS Show

This past September at the WMS 2009 Show, CNC Automation in collaboration with our Suppliers and customers built kitchen cabinets, wardrobes and vanities that were then donated to the Habitat for Humanity Restore Program.

Many of the people who worked together during the show to not only illustrate what our products and machines could do in a real time production environment, were humbled by what was being created for the Habitat for Humanity program.  Too often during shows, raw material is wasted and finished products are destroyed once the show is completed.  This time CNC Automation and our partners wanted to make a difference.  We contacted Habitat for Humanity to see if there was a need.  This partnership proved to be rewarding to all concerned. 

       

 

I would like to share with you, a letter that was received from Stewart Hardacre, President and Chief Operating Officer for Habitat for Humanity Canada.

 

Habitat for Humanity Letter of Appreciation

Thermwood demonstrates the CabinetShop 43 at WMS Expo in Toronto, Canada

Posted by Duane Marrett on Thu, Sep 24, 2009

Tags: Thermwood, eCabinet Systems, CNC, control nesting, New, CNC Routers, Productivity, Nested Base, Trade Shows, edgebanding, CabinetShop, Model 43, Cabinet, High Performance, cabinets, nested based, QuickCut, 43, Low Cost, Easy, edgebander, CNC Automation, WMS, Fravol

Today is the first day at the WMS show in Toronto where our Canadian Dealer, CNC Automation has a very nice booth with a couple of Thermwood CNC Routers including the New CabinetShop43. We are continualy adding pictures from the show to our TwitPic account. You can view them here:

http://www.twitpic.com/photos/thermwood

You can also follow Thermwood, CNC Automation and the WMS show on our twitter page or blog:

http://www.twitter.com/thermwood

The booth consists of two Thermwood routers, CabinetShop45 and CabinetShop43., and two Fravol Edgebanders, S4 and S7.  They are demonstrating eCabinet Systems and QuickCut on the CS43, cutting random cabinets and 20-20 Technologies is sending files to the CS45.

The CS45 is also creating furniture for Canada's Habitat for Humanity. Once the parts are cut on the machine, they will get edgebanding, finished and assembled right there in the booth, so there are other secondary type of machines within the booth.

 Here are a couple of pics of the CNC Automation /Thermwood booth at the opening of the show:

 Thermwood Booth at the strart of the WMS Expo in Toronto, Canada

Assembling cabinets cut on the CabinetShop 43 at the WMS Expo in Toronto, Canada

 

Thermwood CabinetShop 43 Performance Videos

Posted by Duane Marrett on Fri, Sep 11, 2009

Tags: Thermwood, CNC, New, CNC Routers, wood, Productivity, Woodworking, Nested Base, 3 Axis, Announcements, CabinetShop, Model 43, Cabinet, High Performance, Cost, cabinets, Video, nested based, Product Information, Gen2, QuickCut, 43, Low Cost, Easy, wood carving, Purchase, carving

We've created a couple of videos demonstrating the superior performance of the CabinetShop 43 in a variety of applications.  The first is the Carving of an inset carving, and the second is Cabinet Cutting.

 

About the CabinetShop 43:  The CabinetShop 43 offers premium performance not normally seen at this price point. For example, it has positioning speeds to 3,180 inches per minute and programmed cutting speeds to 2,250 Inches per minute. The actual speed at which you can cut is determined more by tooling and material than by the machine, but its speed is indicative of the overall solid CNC performance of the CabinetShop 43.

Thermwood Introduces Low Cost, High-Performance CabinetShop 43

Posted by Duane Marrett on Wed, Sep 02, 2009

Tags: Thermwood, CNC, New, 3 Axis, Announcements, CabinetShop, Model 43, Technology, Cabinet, High Performance, Cost, cabinets, QCore, nested based, QuickCut, closets, 43, Low Cost, manufacturing, Ken Susnjara

We are pleased to introduce a revolutionary new CNC Router System, called the CabinetShop 43, for nested based applications. This new high performance CNC router is built in the US, at Thermwood's Southern Indiana factory and utilizes a whole new, highly efficient manufacturing approach which results in a superior structure coupled with enhanced use of materials, all at a dramatically lower price.

 

CabinetShop 43

The new machine features a 61 by 121 inch fixed table, a 10 HP HSD spindle and an eleven position automatic tool changer. It offers high acceleration, high performance motions in both positioning and cutting. This new system includes quality features seldom, if ever, found at this price point including full stress relieved weldments, high-end Siemens drives throughout, THK rails and three-dimensional volumetric position compensation.

The system also includes Thermwood's QCore SuperControl which sharply distinguishes it from every other machine in this class offering features such as:

"QuickCut" is the fastest, simplest, easiest way to make cabinets and closets ever. Just select and resize a cabinet from the library and cut it, all right at the machine control.

"Job Level Interface" means you communicate with every major cabinet design software package using a single job file instead of dozens or hundreds of individual programs. Nesting and program development happen automatically at the machine; an approach that offers dramatically simpler operation and higher productivity.

The QCore SuperControl also executes standard G-Code programs developed elsewhere.

The QCore SuperControl also has an impressive list of operating features all with one purpose, make the machine as foolproof as possible to reduce errors, minimizing the time you fiddle with the machine. It runs more with less effort.

- Automatic Tool Management helps you manage tooling and tracks tool life

- Maintenance Tracking tracks machine use and guides you through routine maintenance

- Graphic Error Reporting shows you exactly where a problem is and suggests solutions

- Complete User Manual in the control

- Dynamic CAD drawings of the entire machine on the control screen

- Maintenance Videos on the control guide you through mechanical adjustments

- Virtual Service provides direct link from the control to Thermwood service

Never before has this level of technical sophistication, quality and performance been available at this price. The CabinetShop 43 is ushering in a new era of productivity, ease of use and profit for custom cabinet operations.

New Low-Cost, High Performance CabinetShop 43 5×10 CNC Router Coming Soon!

Posted by Duane Marrett on Thu, Aug 27, 2009

Tags: CNC Routers, 3 Axis, Announcements, CabinetShop, Model 43, High Performance, Cost, 43, Low Cost

CabinetShop 43 Coming Soon! 

We are pleased to announce the upcoming arrival of our latest machine, the CabinetShop 43! This low-cost, high-performance 5×10 table CNC Router is perfect for making nested based cabinets, closets, furniture and upholstered frames.

Look for more information about the CabinetShop 43 coming in the next few weeks.

Until then - if you would like to know more, please contact us for the inside scoop.