THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at CAMX 2021!

Posted by Duane Marrett on Fri, Oct 01, 2021

Tags: Thermwood, Announcements, Trade Shows, Large Scale, Thermwood LSAM, SABIC, LSAM Additive Printers, Airtech, High Temperature, Techmer PM, CAMX

Thermwood LSAM

Live Printing

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at CAMX 2021!

Thermwood will be printing high temp autoclave aerospace tooling on an LSAM Additive Printer 510 LIVE at CAMX 2021 in Dallas, TX, October 19th-21st in Booth #M44B.  LSAM Research Laboratory at Purdue ADDITIVE3D simulation software will be on display as well in adjacent Booth #M44, with Purdue representatives on site for demonstrations.  We will be printing a different material each day, donated by AIRTECH, SABIC AND TECHMER PM.  This promises to be an exciting demonstration of the LSAM Additive Printer Large Scale Additive System! 

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at Rapid + TCT 2021

PXL_20210914_170431874

Free CAMX 2021 Exhibit Pass & 15% off Conference Registration Fee

Click the link below to Be Our Guest and register for a Free CAMX Exhibit pass and 15% off the Conference Registration Fee.

Free Exhibit Hall Pass Code: FREEEX021

15% off Full Conference Registration Code: FREEFULL21

CAMX 2021 Thermwood Free Exhibit Hall Pass Link

Make plans now to visit the Kay Bailey Hutchinson Convention Center and stop by Thermwood Booth #M44B to witness this live and in-person!


Thermwood LSAM Research Laboratory at Purdue University

LSAM Research Laboratory at Purdue ADDITIVE3D Software on Display

Representatives from the recently announced Thermwood Research Laboratory at Purdue University (located in Purdue University's Composites Manufacturing Simulation Center - CSMC) will also be on hand to demonstrate their ADDITVE3D simulation software.

Additive3D Software from LSAM Research Laboratory at Purdue University


airtech_logo-1

AIRTECH High Temp Material - Tuesday, October 19th

On Tuesday, October 19th, we will be printing AIRTECH PEI DALTRAM I-350CF


SABIC

SABIC High Temp Material - Wednesday, October 20th

On Wednesday, October 20th we will be printing SABIC LNP™ THERMOCOMP™ AM EC004XXAR1 ULTEM compound.


Techmer PM

TECHMER PM High Temp Material - Thursday, October 21st

On Thursday, October 21st, we will be printing TECHMERPM PESU 1810 3DP.