Thermwood LSAM Additive Printer 510 LIVE Printing at JEC World 2024

Posted by Duane Marrett on Thu, Jan 04, 2024

Tags: Thermwood, Announcements, Trade Shows, Purdue, Live Demonstrations, Large Scale, Thermwood LSAM, SABIC, LSAM Additive Printers, Airtech, Techmer PM, JEC World

Thermwood LSAM

Thermwood LSAM Additive Printer 510 LIVE Printing at JEC World 2024

Thermwood will be LIVE printing an autoclave capable tool for composite layup of an airplane engine air inlet duct on an LSAM Additive Printer 510 in the LIVE Demo Area located in Hall 6 at JEC World 2024 in Paris, France on March 5th-7th. We will print a new tool each day with material from a different material supplier (Sabic LNP™ THERMOCOMP™ AM EC004EXAR1, Airtech Dahltram I-350CF, and Techmer PM PESU-1810).


Daily Interactive Demonstration

In addition to LIVE printing throughout the day, we will also present an interactive demonstration once per day that will allow participants to see a real-world application of creating high-temp tooling with an LSAM system. Topics covered will be the collaborative projects, ongoing research initiatives and illuminating case studies that help accelerate advancements in comprehensive knowledge and future innovation within the field.  Participants will have the unique opportunity to pose questions to our industry experts and gain valuable insights into how LSAM can elevate and optimize their production process. This live demonstration will help bridge the gap between theory and practical application and help understand the full potential of LSAM and how it can help enhance productivity and innovation. We will also have our regular booth staffed by our knowledgeable sales team that can help answer any questions you might have (Hall 6 P52).

LSAM Research Laboratory at Purdue ADDITIVE3D Software on Display

Eduardo Barocio, Assistant Director of Additive Manufacturing at Purdue University's Composite Manufacturing & Simulation Center will also be on hand to demonstrate their Additive3D software, a powerful tool that not only simulates workflow, but also predicts the printing and as-manufactured performance of parts produced through extrusion deposition additive manufacturing.  

Additive3D Software from LSAM Research Laboratory at Purdue University


About the LSAM Additive Printer

The LSAM Additive Printer systems are single gantry, moving table configurations and are available in two table sizes, 5’x5’ and 5’x10’. The 5’x10’ table is available in two configurations, 5’ wide with 10’ of front to back motion and 10’ wide with 5’ of front to back motion. Choice of configuration depends on several factors, fitting it existing factory floor space is one factor.

The specially designed, highly rigid tab and slot, structural steel gantry also incorporates a fume extraction system that pulls print fumes through specially designed activated charcoal filters to remove them and “sweeten” the air.

LSAM Additive Printers use the exact same print head mechanism as all the others, including the largest LSAM Systems which means that they produce the same amazing print quality that has made LSAM the leader in large scale additive printing. They also use the same highly advanced Ultra 6 control with all its exclusive, patented print features and capability.

The systems come standard with a single hopper polymer dryer for applications that don’t change print material very often. For installations that print a wider variety of materials, a dual hopper dryer is available as an option.

An enclosure that surrounds the machine is also available. The machine with the full enclosure can also be built to meet European CE standards.

THERMWOOD LSAM Additive Printer 510 printing LIVE at CAMX 2022 in Anaheim, CA!

Posted by Duane Marrett on Thu, Oct 13, 2022

Tags: Thermwood, Announcements, Trade Shows, Purdue, Large Scale, Thermwood LSAM, Ascent Aerospace, LSAM Additive Printers, Airtech, CAMX, General Atomics

Thermwood LSAM

Live Printing

LSAM Additive Printer AP will be live Printing at CAMX 2022

For CAMX 2022 in Anaheim, CA on October 18th-20th, Thermwood will be printing LIVE on an LSAM Additive Printer 510 – two sections of a multi-piece layup tool each day using Airtech Advanced Materials Group Dahltram™ C-250 CF carbon fiber reinforced PC material. LSAM Research Laboratory at Purdue ADDITIVE3D Software will be on display as well, with Purdue representatives on site for demonstrations.  We will also have several large customer-created large scale tools on display from Airtech, Ascent Aerospace, General Atomics and more. 

This promises to be an exciting demonstration of the LSAM Additive Printer Large Scale Additive System in Booth #W2.  

LSAM Additive Printer AP 510

See Thermwood print live at CAMX 2022


Thermwood LSAM Research Laboratory at Purdue University

LSAM Research Laboratory at Purdue ADDITIVE3D Software on Display

Representatives from the Thermwood Research Laboratory at Purdue University (located in Purdue University's Composites Manufacturing Simulation Center - CSMC) will also be on hand to demonstrate their ADDITVE3D simulation software.

Additive3D Software from LSAM Research Laboratory at Purdue University


Airtech Advanced Materials Group

We will be printing two sections of a multi-piece layup tool each day using Airtech Advanced Materials Group Dahltram™ C-250 CF carbon fiber reinforced PC material


About the LSAM Additive Printer

The LSAM Additive Printer systems are single gantry, moving table configurations and are available in two table sizes, 5’x5’ and 5’x10’. The 5’x10’ table is available in two configurations, 5’ wide with 10’ of front to back motion and 10’ wide with 5’ of front to back motion. Choice of configuration depends on several factors, fitting it existing factory floor space is one factor.

The specially designed, highly rigid tab and slot, structural steel gantry also incorporates a fume extraction system that pulls print fumes through specially designed activated charcoal filters to remove them and “sweeten” the air.

LSAM additive Printers use the exact same print head mechanism as all the other, including the largest LSAM Systems which means that they produce the same amazing print quality that has made LSAM the leader in large scale additive printing. They also use the same highly advanced Ultra 6 control with all its exclusive, patented print features and capability.

The systems come standard with a single hopper polymer dryer for applications that don’t change print material very often. For installations that print a wider variety of materials, a dual hopper dryer is available as an option.

An enclosure that surrounds the machine is also available. The machine with the full enclosure can also be built to meet European CE standards.

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at CAMX 2021!

Posted by Duane Marrett on Fri, Oct 01, 2021

Tags: Thermwood, Announcements, Trade Shows, Large Scale, Thermwood LSAM, SABIC, LSAM Additive Printers, Airtech, High Temperature, Techmer PM, CAMX

Thermwood LSAM

Live Printing

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at CAMX 2021!

Thermwood will be printing high temp autoclave aerospace tooling on an LSAM Additive Printer 510 LIVE at CAMX 2021 in Dallas, TX, October 19th-21st in Booth #M44B.  LSAM Research Laboratory at Purdue ADDITIVE3D simulation software will be on display as well in adjacent Booth #M44, with Purdue representatives on site for demonstrations.  We will be printing a different material each day, donated by AIRTECH, SABIC AND TECHMER PM.  This promises to be an exciting demonstration of the LSAM Additive Printer Large Scale Additive System! 

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at Rapid + TCT 2021

Free CAMX 2021 Exhibit Pass & 15% off Conference Registration Fee

Click the link below to Be Our Guest and register for a Free CAMX Exhibit pass and 15% off the Conference Registration Fee.

Free Exhibit Hall Pass Code: FREEEX021

15% off Full Conference Registration Code: FREEFULL21

CAMX 2021 Thermwood Free Exhibit Hall Pass Link

Make plans now to visit the Kay Bailey Hutchinson Convention Center and stop by Thermwood Booth #M44B to witness this live and in-person!


Thermwood LSAM Research Laboratory at Purdue University

LSAM Research Laboratory at Purdue ADDITIVE3D Software on Display

Representatives from the recently announced Thermwood Research Laboratory at Purdue University (located in Purdue University's Composites Manufacturing Simulation Center - CSMC) will also be on hand to demonstrate their ADDITVE3D simulation software.

Additive3D Software from LSAM Research Laboratory at Purdue University


airtech_logo-1

AIRTECH High Temp Material - Tuesday, October 19th

On Tuesday, October 19th, we will be printing AIRTECH PEI DALTRAM I-350CF


SABIC

SABIC High Temp Material - Wednesday, October 20th

On Wednesday, October 20th we will be printing SABIC LNP™ THERMOCOMP™ AM EC004XXAR1 ULTEM compound.


Techmer PM

TECHMER PM High Temp Material - Thursday, October 21st

On Thursday, October 21st, we will be printing TECHMERPM PESU 1810 3DP.


 

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at Rapid + TCT 2021

Posted by Duane Marrett on Thu, Sep 02, 2021

Tags: Thermwood, Announcements, Trade Shows, Large Scale, Thermwood LSAM, SABIC, LSAM Additive Printers, RAPID + TCT, Airtech, High Temperature, Techmer PM

Thermwood LSAM

THERMWOOD LSAM Additive Printer 510 will be LIVE Printing High Temp Autoclave Aerospace Tooling at Rapid + TCT 2021

Live Printing

Thermwood will be printing high temp autoclave aerospace tooling on an LSAM Additive Printer 510 LIVE at RAPID + TCT 2021 in Chicago, IL September 13th-15th.  LSAM Research Laboratory at Purdue ADDITIVE3D Software will be on display as well, with Purdue representatives on site for demonstrations.  We will be printing a different material each day, donated by SABIC, TECHMER PM and AIRTECH.  This promises to be an exciting demonstration of the LSAM Additive Printer Large Scale Additive System. 

Free Rapid + TCT Expo Pass & $100 off Conference Registration Fee

Click the link below to Be Our Guest and register for a Free Rapid + TCT Expo pass and $100 off the Conference Registration Fee.

Use Promo Code: 10016220

Free Rapid + TCT Expo Pass & $100 off Conference Registration Fee

Make plans now to visit the McCormick Center and stop by Thermwood booth #E7628 to witness this live and in-person!


Thermwood LSAM Research Laboratory at Purdue University

LSAM Research Laboratory at Purdue ADDITIVE3D Software on Display

Representatives from the recently announced Thermwood Research Laboratory at Purdue University (located in Purdue University's Composites Manufacturing Simulation Center - CSMC) will also be on hand to demonstrate their ADDITVE3D simulation software.

Additive3D Software from LSAM Research Laboratory at Purdue University


SABIC

SABIC High Temp Material - September 13th

On Monday, September 13th we will be printing SABIC LNP™ THERMOCOMP™ AM EC004XXAR1 ULTEM compound.


Techmer PM

TECHMER PM High Temp Material - Tuesday, September 14th

On Tuesday, September 14th, we will be printing TECHMERPM PESU 1810 3DP.


airtech_logo-1

AIRTECH High Temp Material - Wednesday, September 15th

On Wednesday, September 15th, we will be printing AIRTECH PEI DALTRAM I-350CF