Click here for more information 

Bamco Custom Woodworking is a Thermwood machine owner:

Guelph Ont.-based cabinetmaker Bamco Custom Woodworking has received a $2.77 million loan from the Ontario government under the Advanced Manufacturing Investment Strategy (AMIS) program. Economic Development Minister Sandra Pupatello made the announcement in early October in Guelph.

"We proposed a project to the Ontario government whereby we would bring in some very high-end finishing equipment from Italy to help us create a 100% water-based finishing system," says Bamco president Bill Van De Ven. The equipment, he says, will also allow the company to create a high gloss buff-less finish. "Currently most high gloss finishes are sprayed on and then buffed to a gloss. This equipment that we bought is so advanced that you won't need to buff it - it will come out with a glass or mirror finish without the hands-on buffing."

Bamco will become one of the first manufacturers in North America to offer the environmentally friendly finishing process. "From a marketing standpoint we plan on targeting companies that would traditionally import that product from Italy or Germany - give them a North American solution," says Van De Ven.

Vice-president of business development, John Fazari says the finishing system also gives the company an edge with businesses in the U.S. "We're not competing with the American dollar so much as with the euro because this product is not available in Canada and the U.S. the way that it will be when we're finished."

Doug Weidner, brand director for Bamco's DolceMano cabinet series, says the new technology will allow them to offer a high quality "green" product. "It gives our dealers a huge advantage in the market."

The finishing system is expected to be up and running in early 2010. It's anticipated that it will help create approximately 70 jobs over the next five years.

Today is the first day at the WMS show in Toronto where our Canadian Dealer, CNC Automation has a very nice booth with a couple of Thermwood CNC Routers including the New CabinetShop43. We are continualy adding pictures from the show to our TwitPic account. You can view them here:

http://www.twitpic.com/photos/thermwood

You can also follow Thermwood, CNC Automation and the WMS show on our twitter page or blog:

http://www.twitter.com/thermwood

The booth consists of two Thermwood routers, CabinetShop45 and CabinetShop43., and two Fravol Edgebanders, S4 and S7.  They are demonstrating eCabinet Systems and QuickCut on the CS43, cutting random cabinets and 20-20 Technologies is sending files to the CS45.

The CS45 is also creating furniture for Canada's Habitat for Humanity. Once the parts are cut on the machine, they will get edgebanding, finished and assembled right there in the booth, so there are other secondary type of machines within the booth.

 Here are a couple of pics of the CNC Automation /Thermwood booth at the opening of the show:

We've created a couple of videos demonstrating the superior performance of the CabinetShop 43 in a variety of applications.  The first is the Carving of an inset carving, and the second is Cabinet Cutting.

About the CabinetShop 43:  The CabinetShop 43 offers premium performance not normally seen at this price point. For example, it has positioning speeds to 3,180 inches per minute and programmed cutting speeds to 2,250 Inches per minute. The actual speed at which you can cut is determined more by tooling and material than by the machine, but its speed is indicative of the overall solid CNC performance of the CabinetShop 43.

We've created an updated QuickCut video that shows how easy and powerful the entire process is:

About QuickCut:  QuickCut is available on all Thermwood CabinetShop series machines and offers the fastest, easiest and simplest possible way to make custom cabinets. Everything is done right at the machine. You don't need separate computers, design software, networks or anything else other than the machine.

Please Click Here for more information on QuickCut 

Delcam's ArtCAM software enabled Adirondack Studios to complete successfully a project to produce five giant chandeliers for the Mohegan Sun Casino at Pocono Downs, Pennsylvania.

For over 30 years, Adirondack Studios, based in Argyle, New York, has helped to design and build themed environments for theatres, arenas, exhibit halls, ballrooms, parks, restaurants, casinos, amusement parks, supermarkets, museums, stadia and marinas. About a year ago, the company began using the ArtCAM artistic CADCAM software to program the CNC routers used to manufacture the majority of the company's products.
"The software that we used in the past for CNC programming worked fine for routine jobs but many of the projects that we get involved in are far out of the ordinary," said Bob Gregory, Senior Router Operator. "We spent too much time watching the clock while we were machining and ran into quite a few bugs. Also, the software developer was not as responsive as we wished when we called in for support."
"We had heard that a number of our competitors were using ArtCAM with very good results so we decided to give it a try," Mr. Gregory continued. "From the very beginning we felt that ArtCAM was a more finished product, more robust, with much higher performance. The tutorials make it very easy to take advantage of the many advanced features of the software. The support provided by Delcam has been superlative and they do listen to, and implement, user suggestions for improving the software."
Adirondack Studios' designers began the construction of the chandeliers by building a 3D model in AutoCAD. The file was imported into ArtCAM to generate the CNC program to machine a positive shape in low-density foam. This was used by a subcontractor to vacuum-form the plastic bowl segments. These were then painted to look like alabaster.
In a similar way, the casting department used ArtCAM to make a mould to cast the grouse models that would be used to decorate the chandeliers. A black-tinted silicone rubber was used to give the grouse the appearance of wrought iron.

The next step was to create a bird's nest pattern and weave it around the circumference of the bowl. ArtCAM allowed the ways in which the strands crossed each other to be varied for a more natural appearance. "Birds do not use a CNC machine to build their nests so it took considerable effort to get the correct look," Mr. Gregory said.  Mr. Gregory generated a CNC program to cut the bird's nest negative shape into MDF. It took only fifteen minutes to create the program compared with at least four hours that would have been needed with the previous software. The mould was used to cast the bird's nests from the same silicon rubber used for the grouse. Finally, the birds and the nests were glued to the bowl of each chandelier.
The finished chandeliers were then installed in the casino. They formed part of a $208-million renovation of the site, aimed at transforming it into the area's leading entertainment complex.

We are now a Business Member of the American Wind Energy Association (AWEA), and will be exhibiting at the Windpower Expo 2010 in Dallas, TX (May 23rd-26th, 2010).  Make plans now to come out and see us in action.

Thermwood offers 3 and 5 axis systems ideally suited for the production, fabrication and trimming of composites and other materials used in the production of wind energy products. 

For more information on our applications in this area, please visit the composite page of our CNC Routers By Applications area.

We are pleased to announce the upcoming arrival of our latest machine, the CabinetShop 43! This low-cost, high-performance 5×10 table CNC Router is perfect for making nested based cabinets, closets, furniture and upholstered frames.

Look for more information about the CabinetShop 43 coming in the next few weeks.

Until then - if you would like to know more, please contact us for the inside scoop.

We are pleased to announce a new, simplified approach to nested based production of cabinets and closets that does not require separate cabinet design software. This new approach, called "QuickCut", is done entirely at the CNC machine.

The operator, working at the machine control, simply selects and resizes cabinets and closets from a built-in library and runs them. This entire process happens at the machine. The process is simple enough that virtually anyone can run it with minimal instruction. Libraries can be modified or extended through a programming service.

"For the first time you can operate a CNC router without extensive training or technical skill", says Thermwood's Vice-President of Marketing Jason Susnjara. "This approach allows cabinetmakers to focus on making cabinets using an amazing new tool that's really easy to use".

Operating a CNC router usually requires specialized knowledge which limits its use to specially trained employees. We used the technical power in our Gen2 SuperControl to totally automate virtually every task, then created a simple user interface, resulting in a system that almost anyone can use without extensive training.

The QuickCut feature targets smaller, less technical shops but can also be used by larger companies to make virtually any part or product in their product line any time they want. A library of parts can be stored on a network drive. At that point, almost anyone can walk up to any QuickCut machine and make any part. It's that easy. By storing files in a central location, management has complete control of anything that is made, anywhere in the factory.

"This new interface takes what has been a confusing area for non-technical users and makes it almost as easy as using a copy machine", states Thermwood's President, David Hildenbrand. "We believe it will fundamentally change how cabinets, closets and perhaps many other products, are made".

All nested based systems from Thermwood are QuickCut compatible and Gen2 systems operating in the field can be retrofitted to make them QuickCut compatible.

For more information on this exciting new development, please visit our QuickCut area of the website.

We've just completed updating and expanding our 3 and 5 axis CNC Router areas on thermwood.com. 

This new interface allows a wider variety of information to be accessed easily and more quickly than our previous version, and lists images, dimensional drawings (which can be easily printed), technical specifications, movies of the machines in action and brochures all in one convenient place.  I've included some screen shots below - to visit, please click on either:

3 Axis CNC Routers

5 Axis CNC Routers

 A cool thing we've just completed is adding our Production Sharing Members to Google Earth.  Google Earth is a free download, and once you have it, you can click on the Production Sharing Members map of your choice and view all of the Members that list their services on an interactive map.  This tool allows you see see at a glance Members who are in your area.

For more information, please visit the Production Sharing Area our website.

About Production Sharing - This is a free listing service that Thermwood offers any of our CNC Router Owners where they can list their production services and allows any eCabinet Systems Member or other interested parties to contact these Production Sharing Members and have their jobs machined out on a CNC Router quickly and cost-effectively.