The video below shows the powerful Cut Ready 43 machining a door and matching drawer front in MDF using diamond tooling. 

Cut Ready 43 Door and Drawer Front Video

More Info on the Cut Ready 43 with Artie Inside

The Cut Ready 43 shown above is equipped with a 5 by 8 table, a 21-position tool changer and a high flow vacuum hold-down system (additional table sizes and options are available).

The Cut Ready 43 is intended to bring the magic of Artie to a lower priced system. It features a full-sized vacuum table and, just like its big brother, doesn’t require a CNC programmer. Just like a Cut Center, it can help you quickly and easily create most products a cabinet shop would want to make without a CNC programmer (only operational training is required).

Since this is a CNC router at its core, you are free to program and operate it as a normal CNC router if you want, but the magic of Artie makes the Cut Ready 43 a whole new exciting experience!

For More Info on the Cut Ready 43, please click here.

Learn More about Artie 

Cut Ready doesn't need a programmer because there is already one inside the control. We call him "Artie".

Despite the cute name, Artie is actually a cutting edge, artificial intelligence engine inside the Cut Ready control. 

He is the first A.I. dedicated to making your manufacturing life easier to handle.  While he is a CNC programmer and designer at heart, he also watches over your shoulder to make sure everything goes smoothly and efficiently. 

You tell him what you want and he creates a program to make it. Be it cabinets, doors, moldings or furniture, Artie will program it for you! 

These are not pre-programmed libraries. No part programs exist in the control until Artie creates them.  He is already capable of programming tens of millions of unique products and is constantly learning how to make and do more and more new things. Artie is easy enough that virtually anyone can work with him with little or no training. For more on Artie, click here.

Cut Ready - The First CNC That Doesn't Need a Programmer!

Cut Ready doesn’t need a programmer because there is already one inside the control. We call him “Artie”.

Despite the cute name, Artie is actually a cutting edge, artificial intelligence engine inside the Cut Ready control. You tell him what you want and he creates a program to make it. 

Artie has actually been hiding out behind the scenes in the Cut Ready control this whole time, but he has never made an appearance until now. He is the first A.I. dedicated to making your manufacturing life easier to handle.  While he is a CNC programmer and designer at heart, he also watches over your shoulder to make sure everything goes smoothly and efficiently. 

You tell him what you want and he creates a program to make it. Whether it is cabinets, doors, moldings or furniture, Artie will program it for you! 

These are not pre-programmed libraries. No part programs exist in the control until Artie creates them. 
He is already capable of programming tens of millions of unique products and is constantly learning how to make and do more and more new things.

Artie is easy enough that virtually anyone can work with him with little or no training. 
 

Cut Ready is currently available on two machines from Thermwood:

The Cut Center - requires neither a CNC programmer nor a trained machine operator. Artie moves beyond just programming to guide the operator through the entire production process real time. It is complete, fully contained with all the ancillary equipment smoothly integrated into a package that almost runs itself.  Pretty much anyone can run a Cut Center.

The Cut Ready 43 - is a lower-priced machine that doesn’t need a CNC programmer, but does require a trained and somewhat skilled machine operator.  With the Cut Ready 43 system, Artie offers help during the production process, but not quite to the extent that it does with a Cut Center.  

Cut Ready Series Machines Detailed Comparison 

More Info on the Cut Ready 43 with Artie Inside

The Cut Ready 43 is equipped with a 5 by 8 table, a 21-position tool changer and a high flow vacuum hold-down system (additional table sizes and options are available).

The Cut Ready 43 is intended to bring the magic of Artie to a lower-priced system. It features a full-sized vacuum table and, just like its big brother, doesn’t require a CNC programmer. Just like a Cut Center, it can help you quickly and easily create most products a cabinet shop would want to make without a CNC programmer (only operational training is required).

Since this is a CNC router at its core, you are free to program and operate it as a normal CNC router if you want, but the magic of Artie makes the Cut Ready 43 a whole new exciting experience!

For More Info on the Cut Ready 43, please click here.

The video below shows the powerful Cut Ready 43 machining a door and matching drawer front in MDF using diamond tooling. 

More Info on the Cut Center with Artie Inside

The Thermwood Cut Center is equipped with a 5'x10' table, easy sheet flipper, vacuum cups and a host of other software and equipment.  It is all designed to help you save time and money, using an easy to operate and sophisticated combination of software and machinery that you can feel confident in.  

We've taken the fear out of automation by combining our easy to use interface and years of experience in the industry to create a powerful tool that will allow you to focus more on your products, business, making money, and worry less about being intimidated by the technical details. It is complete, fully contained with all the ancillary equipment smoothly integrated into a package that almost runs itself.

The Cut Center is the ultimate in next generation CNC. 

Your time is money, and the Cut Center helps you save more of both.

For More Info on the Cut Center, please click here.

What Some of Our Cut Center Customers Are Saying...

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

With this latest update, we've added over 1,200 additional cabinet definitions, updated many cabinet images and expanded the information presented with the cabinet, added an informational Update section to Cut Ready, added varying depths to Shaker Doors and incorporated the ability for users to share left over off-fall between Cut Ready and CNC Mode. 

Over 1,200 Cabinet Definitions Added

Thermwood has added over 1,200 new cabinet definitions to Cut Ready, giving Artie (Cut Ready's A.I.) the ability to make a wider range of cabinet styles!  This batch of definitions focus on kitchen base cabinets for both frameless & face frame choices. Below are a few examples: 

Updated Images and Descriptions

We’ve also replaced lots of cabinet images to make choosing a cabinet easier, while also including valuable information:

Expanded Update Information

Finding out what is in each update just got easier, too.  Simply select the information button to learn what is in each update.

Varying Depths for Shaker Doors

Shaker Doors now have varying depths to choose from:

Easily Share Off-Fall Between Cut Ready and CNC Mode

Advanced users who currently switch between Cut Ready and CNC Mode can now easily share your left-over off-fall between the two modes.

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

 

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

With this latest update, we've added greater flexibility to Face Frame Bath Cabinets.  You now have more control when resizing these cabinets.  In addition, we've added several more, unique Bathroom cabinets as well.

New Bathroom Cabinet Additions Examples:

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

 

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

With this latest update, we've expanded the options when choosing a grain matching style for cabinets.  The interface has been simplified and expanded to allow you to pick multiple directions for the grain matching on your cabinets.

Expanded Grain Matching 

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

 

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

Included in this update is the new ability to view and select specific sheets to cut from your nested sheets in a job.  We call this "jumping" over sheets.

New Ability - "Jumping" Over Sheets

If you have a situation where maybe you've got a few sheets of bad material mixed into your job, or if you only want to view/run selected sheets from your job, this new update gives you that ability. 

 You simply select the sheet you would like to jump to and you are ready to start cutting parts!

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

 

Cut Ready - The First CNC That Doesn't Need a Programmer!

Cut Ready doesn’t need a programmer because there is already one inside the control. We call him “Artie”.

Despite the cute name, Artie is actually a cutting edge, artificial intelligence engine inside the Cut Ready control. You tell him what you want and he creates a program to make it. 

Artie has actually been hiding out behind the scenes in the Cut Ready control this whole time, but he has never made an appearance until now. He is the first A.I. dedicated to making your manufacturing life easier to handle.  While he is a CNC programmer and designer at heart, he also watches over your shoulder to make sure everything goes smoothly and efficiently. 

You tell him what you want and he creates a program to make it. Whether it is cabinets, doors, moldings or furniture, Artie will program it for you! 

These are not pre-programmed libraries. No part programs exist in the control until Artie creates them.  He is already capable of programming tens of millions of unique products and is constantly learning how to make and do more and more new things. Artie is easy enough that virtually anyone can work with him with little or no training. For more on Artie, click here.

Cut Ready is currently available on two machines from Thermwood:

 The Cut Center - requires neither a CNC programmer nor a trained machine operator. Artie moves beyond just programming to guide the operator through the entire production process real time. It is complete, fully contained with all the ancillary equipment smoothly integrated into a package that almost runs itself.  Pretty much anyone can run a Cut Center.

The Cut Ready 43 - is a lower priced machine that doesn’t need a CNC programmer but does require a trained and somewhat skilled machine operator.  With the Cut Ready 43 system, Artie offers help during the production process but not quite to the extent that it does with a Cut Center.  

More Info on the Cut Ready 43 with Artie Inside

The Cut Ready 43 is equipped with a 5 by 8 table, a 21-position tool changer and a high flow vacuum hold-down system (additional table sizes and options are available).

The Cut Ready 43 is intended to bring the magic of Artie to a lower priced system. It features a full-sized vacuum table and, just like its big brother, doesn’t require a CNC programmer. Just like a Cut Center, it can help you quickly and easily create most products a cabinet shop would want to make without a CNC programmer (only operational training is required).

Since this is a CNC router at its core, you are free to program and operate it as a normal CNC router if you want, but the magic of Artie makes the Cut Ready 43 a whole new exciting experience!

For More Info on the Cut Ready 43, please click here.

This video shows the powerful Cut Ready 43 machining a door and matching drawer front in MDF using diamond tooling. 

Cut Ready 43 Door and Drawer Front Video

More Info on the Cut Center with Artie Inside

The Thermwood Cut Center is equipped with a 5'x10' table, easy sheet flipper, vacuum cups and a host of other software and equipment.  It is all designed to help you save time and money, using an easy to operate and sophisticated combination of software and machinery that you can feel confident in.  

We've taken the fear out of automation by combining our easy to use interface and years of experience in the industry to create a powerful tool that will allow you to focus more on your products, business, making money, and worry less about being intimidated by the technical details. It is complete, fully contained with all the ancillary equipment smoothly integrated into a package that almost runs itself.

The Cut Center is the ultimate in next generation CNC. 

Your time is money, and the Cut Center helps you save more of both.

For More Info on the Cut Center, please click here.

What Some of Our Cut Center Customers Are Saying...

The video below shows the powerful Cut Ready 43 machining a door and matching drawer front in MDF using diamond tooling. 

Cut Ready 43 Door and Drawer Front Video

More Info on the Cut Ready 43 with Artie Inside

The Cut Ready 43 shown above is equipped with a 5 by 8 table, a 21-position tool changer and a high flow vacuum hold-down system (additional table sizes and options are available).

The Cut Ready 43 is intended to bring the magic of Artie to a lower priced system. It features a full-sized vacuum table and, just like its big brother, doesn’t require a CNC programmer. Just like a Cut Center, it can help you quickly and easily create most products a cabinet shop would want to make without a CNC programmer (only operational training is required).

Since this is a CNC router at its core, you are free to program and operate it as a normal CNC router if you want, but the magic of Artie makes the Cut Ready 43 a whole new exciting experience!

For More Info on the Cut Ready 43, please click here.

Learn More about Artie 

Artie has actually been hiding out behind the scenes in the Cut Ready control this whole time, but he has never made an appearance until now. He is the first A.I. dedicated to making your manufacturing life easier to handle, and with this latest update, we flipped on his switch!  While he is a CNC programmer and designer at heart, he also watches over your shoulder to make sure everything goes smoothly and efficiently. 

You tell him what you want and he creates a program to make it. Be it cabinets, doors, moldings or furniture, Artie will program it for you! 

These are not pre-programmed libraries. No part programs exist in the control until Artie creates them.  He is already capable of programming tens of millions of unique products and is constantly learning how to make and do more and more new things. Artie is easy enough that virtually anyone can work with him with little or no training. For more on Artie, click here.

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

Included in this update are enhancements/support to the Cut Ready Publisher:

• The ability to group and run Doors, Drawer Boxes and Cabinet and 1 entire job (rather than 3 separate jobs).
• Additional support for Doors that have been customized by the designer.

---

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---