Thermwood is proud to announce Colton O'Brien and Carson Vaal as our scholarship recipients for the Class of 2018.  Each will receive a $2,000 renewable scholarship.  Since the introduction of these renewable scholarships, Thermwood has awarded over $200,000 to students wishing to further their education. 

Colton O'Brien is the son of Chris and Jennifer O’Brien of Stendal, and is a graduate of Southridge High School.

While at Southridge, Colton was a member of the football and track and field teams. He also participated in the Bass fishing club, FCA, Spirit Club and Outdoors Club.

He was a part of the 2017 State Champion football team, as well as the 2015 State Bass Fishing team.

Colton will be attending Ivy Tech this fall for HVAC and Electrical.

Carson Vaal is the son of Courtney and Scott Vaal of Jasper, and is a graduate of Jasper High School.

He has been active with Robotics, Marching Band, Symphonic Band and Boy Scouts.

He is an Eagle Scout and a State Gold Ranking Saxophone Soloist.

This fall, Carson with be attending Ball State University to study Architecture

Thermwood would like to congratulate all seniors of the Class of 2018 and wish them the very best in their future studies and endeavors! 

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

Included in this update are the addition of the Frameless version of Bath cabinets, complimenting the already existing Face Frame version. Included are cabinets designed for Counter Tops, some new versions of Tall cabinets, as well as cabinets designed for toilets and Sink Bridges.

Frameless Bath Cabinets Examples

Two drawers and three shelves

Right hinge door - 1 drawer, 1 shelf

---

 

 

Corner cabinet (open)

---

Sink Bridge (3 drawer) 

---

 

Tall cabinet with left hinge door and 2 equal drawers

---

Tall cabinet with opening for toilet, double doors and 1 drawer

---

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

 

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center

Included in this update is the Casual Country Furniture Collection, the ability to measure more than one tool at a time and a new tool to help you automatically check whether your user-created eCabinet Systems designs will work correctly in Cut Ready. 

Casual Country Furniture Collection

This collection consists of simple casual designs, reminiscent of country or farmhouse style furniture. Because of its simple character, the Casual Country Furniture Collection offers a lot of design and application freedom. Appearance can be more formal, even contemporary, or they can be casual depending on how pieces are finished and embellished. 

The collection lends itself to a variety of craft touches such as the addition of rub-on transfer images, decals, hob nails, antique tin, cushions for the benches and the like. You can add trim or round over edges with a hand router. The Casual Country Furniture library offers basic structures that are the core for a huge amount of creativity.

Measuring Multiple Tools at Once

Measuring tools is now a lot easier with the added ability to measure multiple tools at the same time, rather than one at a time.

 

Check User-Created eCabinet Systems Jobs for Compatibility 

Now you have the ability to check your user-created eCabinet Systems designs for compatibility (material thickness, etc). with Cut Ready before sending them to your Cut Center via Cut Ready Publisher. 
*look for an eCabinet Systems update in the very near future

 

Fixes included in this update 

• When printing door sizes for Face Frame cabinets, a specific scenario would cause software instability. (Fixed)
• Back Button within the Cut/Line Editor was not working properly. (Fixed)
• Back Button within the Furniture section would take you back to Job Name. (Fixed)
• Added additional Corner Cabinet error handling so you cannot enter invalid values. (Fixed)
• Better keypad performance. (Fixed)
• Scanning a recut part would occasionally cause “Part cannot be found” message. (Fixed)
• Invalid calculations on ¾” Drawer box materials. (Fixed)

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

Latest eCabinet Systems Build 6.2 Summary

We are constantly adding new features and abilities to our powerful eCabinet Systems Software.

A few of the highlights of the latest build (6.2) is an auto dimensioning feature for the wall elevation view, scaled prints in the wall elevation view, auto dimensions for vertical walls/rooms and much more.  See below for detailed info on all of the new additions and fixes in this release. 

Please Click Here to download the latest build (6.2):

 Additions in Build 6.2:

Auto Dimension in Wall Elevation View

The auto dimensioning feature for the Wall Elevation View shows you a quick view of dimensions between cabinets and the overall wall dimensions. Settings in the right click menu allow you to filter which dimensions are displayed.

Scaled Prints in Wall Elevation View

Scaled printing iis an option from the right click menu. It  allows you a quick way to create a measurable print that can then be given to an architect.

 

Auto Dimensions for Vertical Walls and Rooms

Allows for the quick dimensioning of items on a wall. The Drafting Parameters from the right click menu allows you to filter out unnecessary dimensions.

 

Cross Section Walls

Allows you to create a cross-sectioned view inside a cabinet. This new cross-section view is automatically created on a new page after selecting somewhere on a cabinet (the red line then appears and creates the cross-section).

Cross Section Walls - Front View

 

 Cross Section Walls - Side View

Export to DXF

Lets you create a DXF from an overhead view of a layout, front view of a wall, or a cabinet. The DXF can then be loaded into a CAD program for additional information to be added.

 
Front view before exporting to DXF

After DXF export - loaded into CAD

Disable Enhanced Pocketing

Enhanced pocketing was a feature added in an earlier version of eCabinet Systems and Control Nesting. Those with older machines cannot use this feature, so the ability to disable enhanced pocketing is a way to keep from having errors at the machine in that case.

 

Cabinet List Report

Creates a report that lists the cabinets in a batch job or room layout. This report can be exported to Excel.

 

Scaled Prints for Vertical Walls in Line Drawing Editor

Works the same as wall elevation scaled print with the addition of custom user dimensions and notes.

 

Ability to Change Edge Banding Thickness

Allows you to change the thickness of the edge banding when creating CNC jobs rather than having to replace the material in the job.

 

 Display in Millimeters as well as Meters

Previously, a displayed dimension over 1000mm displayed in meters with decimal places. Now we have added the ability to display it in just millimeters.  

Dimensions displayed as Meters

 

Dimensions displayed as Millimeters

---

 Fixes in Build 6.2:

• Angle Part not working on part with full dado (FIXED)
• Bodies lost when returning to batch and creating new assembly (FIXED)
• Double Door grain not correct when adding to corner cabinet (FIXED)
• Left Applied End Door positioned wrong with detached toe (FIXED)
• In Metric, changing a Construction Parameters changes the Construction Parameter to zero in Global Item Modifications (FIXED)
• Pull hardware pattern does not apply on the drawer (FIXED)
• Variable will update for the currently displayed part, but doesn't for the another part using same variable (FIXED)
• When editing depth with Constraint Manager, selection does not display correctly (FIXED)
• When in metric, Banding Stock amount is displayed in Linear Feet (FIXED)
• Specific scenario causes new cabinet to not have outline bodies (FIXED)
• Angled front corner cab with a PE cut in top front stretcher gives error message when changing material thickness (FIXED)
• When a top or deck is removed from a cabinet, the locked opening function no longer works (FIXED)
• When Assembly Group Parts is used rather than Cabinet Group Parts in batch, hole pattern is cut as backside operation (FIXED)
• When making a specific change in Advanced settings of Stretcher Editor, stretcher behaves incorrectly (FIXED)
• When adding a rule for Thickness (% of Material), displays as inch or mm amount rather than percentage (FIXED)
• Creating a note, or typing after a leader line does not function (FIXED)
• Missing dovetail geometry in CNC (FIXED)
• Duplicate Left/Right not working correctly in Elevation View (FIXED)
• Error when doing Part Editor profiling(FIXED)
• MDF Door Markers in Space (FIXED)
• Error when hitting cancel on Profile Tool Section Dialog (FIXED)
• Error when Printing Nesting Labels (FIXED)
• Missing Mortise and Tenon for Top Left Rail (FIXED)
• Error when creating MDF Arch Door (FIXED)

Latest Cut Ready Update Summary

We are constantly adding new features and abilities to the Award-Winning Cut Ready Cut Center.  

Included in this update is the Contemporary Wave Bedroom Suite, added flexibility when searching for user-created jobs and the ability to select and remove several jobs at once to help clean/maintain your jobs list. 

Contemporary Wave Bedroom Suite

The Contemporary Wave Bedroom Suite is a collection of low, chic and very stylish bedroom furniture available with or without the Wave pattern.  It is reminiscent of high-end Italian contemporary furniture, with all the grace and style that it implies.  Perfect for the person who enjoys modern, high style surroundings.

Contemporary Wave Bedroom Suite Dresser featuring hidden shelving on either end. 

New Job Search Flexibility

In addition to searching by job name or user, Cut Ready now has the ability to easily search for jobs within a date range, or by type.  It also adds the ability to select and remove several jobs at once to help clean and maintain your Jobs list.

 

About the Cut Center

The Thermwood Cut Center is an exciting alternative to traditional CNC routers for making a wide variety of products including cabinets, closets, furniture, doors, drawers and much more.  Just tell the machine what you what to make and it does it...it is that simple!  NO programming is required. 

---

Thermwood Corporation announced today the promotion of Scott Vaal to the position of LSAM Product Manager.

In his new role, Scott will be responsible for all aspects of our Large Scale Additive Manufacturing (LSAM) system including product/software enhancements, potential markets and more. 

Scott is a long-standing employee with Thermwood and has held various positions with the company over the past 24 years.

Scott is married with 3 children and resides in Southern Indiana.

Thermwood Corporation a leading manufacturer of CNC routers and Large Scale Additive Manufacturing systems with thousands of installations worldwide spanning 45+ years of business.

New Re-Designed Thermwood.com

The all-new www.thermwood.com launches today, and is packed with new features to help you quickly and easily find essential information about our machines and services. 

Clean and Uncluttered Design

The new website has a clean and uncluttered design, improved navigation and functionality thoughout as well as improved access to product information and videos.

It works across all platforms and is responsive and optimized for mobile devices.

Request a Consultation

Our CNC Experts can evaluate your production needs to determine how you can reduce costs and increase efficiency. Thermwood also offers free live demonstrations of our equipment and software to qualified companies using your product details.

Thermwood Corporation is pleased to announce that Sam Collins has been appointed as a Demonstration Technician. 

In his new role, Samuel will be overseeing CNC solutions for customers that range over a wide variety of applications that include programming and operating various CNC machining centers. 

Samuel was a Thermwood field service technician for over 2 years with CNC experience. 

Samuel is engaged to be married and resides in Southern Indiana.

Thermwood Corporation a leading manufacturer of CNC routers and Large Scale Additive Manufacturing systems with thousands of installations worldwide spanning 45+ years of business.

Thermwood Corporation announced today of the promotion of Patrick Dauby to Manager of Demonstrations and Software Sales. 

In his new role, Patrick will be responsible for managing and scheduling Thermwood’s Customer Demonstration facility and overseeing CNC solutions for customers that range over a wide variety of applications.  He will also be responsible for software sales. Patrick has held various positions within Thermwood and has accumulated over 6 years of CNC experience. 

Patrick is married with their first child due later this year and resides in Southern Indiana.

Thermwood Corporation a leading manufacturer of CNC routers and Large Scale Additive Manufacturing systems with thousands of installations worldwide spanning 45+ years of business.